logo
  • Coating

    MULTI

Our Multi coating was designed for everyone looking for an easy to use all in one nano particle coating.

Multi is a highly advanced coating which is cost effective and outperforms all other coatings of similar nature- suited for trade professionals.

This is due to our nano hyperquartz particle which penetrates exposed microscopic pores on a multitude of surfaces. Our original high performance glass coating has been incorporated into our multi surface coating.

Multi promotes self-cleaning properties on its applied surface, reducing the need for cleaning and preserving the substrate from degradation.

Perfect for Professional Protection of:

  • Automotive Glass - (Min 12 months on windshield, 18-24 months on side glass)
  • Commercial and Domestic Glass - up to 5 years protection
  • Worktops (not raw wood)
  • Ceramic Sinks, shower trays, baths
  • Chromeware
  • Sanitaryware

MULTI is available to trade professionals only (no accreditation necessary)- to gain access please contact us to create an account.

Click below for further information

Zero Hardness Rated Coating- a true nano particle coating


Easy Self-cleaning properties
Abrasion resistant
Anti-Microbial
Alcohol Based
Zero endocrine altering chemicals
Zero hazardous chemicals
Highly Chemical resistant
Temperature resistance- 400c
pH tolerance: 2-12
Water contact angle: 100 Degrees
Durability: 2-5 Years but dependent on substrate type, regular chemical exposure, abrasion and dirt build up

Application guidelines for Multi has been broken down into 2 categories- Simple and Advanced

Tip- All surfaces need to be clean, grease free- ideally perform an isopropyl alcohol wipe down first

Simple Method- Spray onto surface and buff off in circular motion.

Advanced Method- Completely absorb lint free cotton pad (make up remover pads) with Multi, apply using crosshatch method, allow 1-2 minutes to flash and remove.

Advanced Glass Method- Completely absorb lint free cotton pad (make up remover pads) with Multi, apply using crosshatch method, allow 1-2 minutes to flash, add second layer on top of first layer using same method, allow 1-2 minutes to flash, remove with 2 microfiber cloths, if residue remains please use isopropyl alcohol to remove any remaining residue.

Acrylic, all types of glass, plastics, all types of Metal, lacquered wood, polished stone, powder-coated metal.

Bathrooms- Glass, mirrors, all types of tiles, sanitary-ware, taps, sinks, toilets, shower screens, chrome-ware, baths, shower tray, grout, flooring, epoxy resin floors, vinyl, laminate flooring.

Cars- Glass, Bodywork (simple method only), Plastics, Wheels, Vegan leather, metal, exhausts, under carriage, wheel wells, entertainment screens, sunroofs.

Kitchens- All types of worktops (not raw wood), all types of cookers, ovens (interior/exterior), taps, sinks, splash-backs, dishwashers, flooring, extractor fans, dining tables/chairs.

Commercial uses- hotels, restaurants, bathrooms, kitchens. All surfaces which require self cleaning abilities.

Hazards
Causes serious eye irritation. Flammable liquid and vapour . May cause drowsiness or dizziness

Precautions
If medical advice is needed, have product container or label at hand : Keep out of reach of children : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking : Wash thoroughly after handling : Wear protective gloves/protective clothing/eye protection/face protection : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing : In case of fire: Use ABC powder extinguisher to extinguish. : Dispose of contents and / or their container according to the separated collection system used in your municipality